Specifications

Fabric OS Commands
264 Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays statistics about Fabric Assist.
Synopsis
faStatsShow
Availability
All users.
Release
V3.1.x
Description
Use this command to display statistical information about Fabric Assist host ports.
This command displays the port number for each Fabric Assist host port located
on the switch. It also displays the total number of LIPs performed by the port
since activation of Fabric Assist zoning.
This command also displays the total number of LIPs that were initiated by Fabric
Assist, and which Fabric Assist PID caused the LIP to be sent.
The message No Fabric Assist Host Ports on this Switch is
displayed if Fabric Assist is disabled, or if there are no Fabric Assist host ports on
the switch.
Each line of output shows:
Operands
None.
faStatsShow
port The port number of the Fabric Assist host.
Total LIPs The total number of LIPs detected on the port since
Fabric Assist was enabled.
Fabric Assist LIPs Total number of LIPs initiated by Fabric Assist.
Last Caused by The PID of the port that caused the last Fabric Assist
initiated LIP.