Specifications

Fabric OS Commands
230 Fabric OS Version 3.1.x/4.1.x Reference Guide
Set the error saving level of a switch.
Syntax
errSaveLvlSet lvl
Availability
Admin
Release
V4.1.x
Description
Use this command to control types of messages that are saved in the persistent
error log. Message types are based on the message severity levels. By default, all
messages of type Panic and Critical are saved in the persistent log. If you want to
save messages of log levels less severe than Critical, use this command to specify
a new message save level. This new message save level is not persistent across a
reboot. It is in effect only for that run time cycle.
Operands
This command has the following operand:
errSaveLvlSet
lvl
Message severity level. Save those error log messages whose
message severity level is less than (more severe) or equal to
this level. The valid values are:
1 - Critical
2 - Error
3 - Warning
4 - Info
5 - Debug