Specifications

diagretry
199Fabric OS Version 3.1.x/4.1.x Reference Guide
Enable or disable retry mode.
Synopsis
diagretry [mode | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable or disable retry mode. The mode is saved in
non-volatile memory and stays in that mode until the next execution of
diagretry.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Retry mode, when enabled, modifies the behavior of the diagnostic test methods,
POST, and burn-in scripts. The exact behavior depends on the tests and scripts that
are run, but the most common result is that spinsilk tests are skipped when
retry mode is enabled.
Operands
This command has the following operands:
If no operand is specified the current value is displayed.
diagretry
mode
Specify 1 to enable retry mode, specify 0 to disable
retry mode. This operand is optional.
-show
Specify this operand to display the current mode
setting. This operand is optional.