Specifications

diagpost
197Fabric OS Version 3.1.x/4.1.x Reference Guide
Enable or disable POST testing.
Synopsis
diagpost [mode | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable or disable POST testing. The mode is saved in
non-volatile memory and stays in that mode until the next execution of
diagpost.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Post mode modifies the behavior of the diagnostics daemon program to inhibit
testing of switch blades when the system is first powered on or a new blade is
added.
Operands
This command has the following operands:
If no operand is specified the current value is displayed.
diagpost
mode
Specify 1 to enable POST test, specify 0 to disable
POST test. This operand is optional.
-show
Specify this operand to display the current mode. This
operand is optional.