Specifications

diagloopid
193Fabric OS Version 3.1.x/4.1.x Reference Guide
Set the diagnostics loop ID.
Synopsis
diagloopid [id | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to select the loop ID to be used by FL mode diagnostics. The
value entered will be converted from a loop ID to the corresponding AL_PA and
used as the port address for any diagnostics that operate in FL port mode.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Operands
This command has the following operands:
If no operand is specified the current value is displayed.
diagloopid
id
Specify the loop Id for FL mode diagnostics. This operand
is optional.
-show
Specify this operand to display the current loop ID. This
operand is optional.