Specifications

Fabric OS Commands
192 Fabric OS Version 3.1.x/4.1.x Reference Guide
Example
To display information about diagnostic commands:
See Also
None.
switch:admin> diagHelp
ramTest System DRAM diagnostic
portRegTest Port register diagnostic
centralMemoryTest Central memory diagnostic
cmiTest CMI bus connection diagnostic
camTest Quickloop CAM diagnostic
statsTest Statistics counter diagnostic
filterTest Frame Filtering Test
portLoopbackTest Port internal loopback diagnostic
sramRetentionTest SRAM Data Retention diagnostic
turboRamTest ASIC built in Turbo RAM Test
cmemRetentionTest Central Mem Data Retention diagnostic
crossPortTest Cross-connected port diagnostic
txdPathTest TXA, TXD connection diagnostic
spinSilk Cross-connected line-speed exerciser
diagClearError Clear diag error on specified port
diagDisablePost Disable Power-On-Self-Test
diagEnablePost Enable Power-On-Self-Test
setGbicMode Enable tests only on ports with GBICs
setSplbMode Enable 0=Dual, 1=Single port LB mode
supportShow Print version, error, portLog, etc.
diagShow Print diagnostic status information
parityCheck Dram Parity 0=Disabled, 1=Enable
spinFab ISL link diagnostic.
loopPortTest L-Port cable loopback diagnostic
fPortTest F-Port cable diagnostic
portTest Start portTest
stopPortTest Stop portTest
portTestShow Get current portTest snapshot information
switch:admin>