Specifications

diagesdports
187Fabric OS Version 3.1.x/4.1.x Reference Guide
Set ESD skip ports list.
Synopsis
diagesdports [itemlist | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to set the ESD IDLE PORTS list. The list is saved in
non-volatile memory and stays in that mode until the next execution of
diagesdports.
The ESD IDLE ports are used by several of the functional test methods to disable
testing on the specified list of ports when ESD mode is enabled (see
setesdmode). The exact type of port list and the exact use of this list are
determined by each test method.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Operands
This command has the following operands:
diagesdports
itemlist
Specify the range of ports to be set to ESD idle. For proper
syntax, see itemlist help page.
-show
Specify this operand to display ESD idle ports list. This
operand is optional.