Specifications

Fabric OS Commands
180 Fabric OS Version 3.1.x/4.1.x Reference Guide
Operands
This command has the following operands:
If no operand is specified, the default is to clear all bad port flags.
Example
To clear the diag software flag:
See Also
diagShow
port
(V3.1.x only)
Specify the port where you want to clear diagnostic error
messages. This operand is optional.
-slot slot
(V4.1.x only)
Specify the slot to clear the diagnostic failure status. This
operand is optional.
-switch switch
(V4.1.x only)
Specify the logical switch number to operate on. If
omitted, then all blades will be cleared. This operand is
optional.
-all
(V4.1.x only)
If specified, all blades will be cleared.
switch:admin> > diagclearerror 1
0x1bcb (fabos): Switch: 0, Error DIAG-CLEARERR, 3,
Pt5 Sl1 Ch0 Qd1 Diagnostics Error Cleared
Err# 0120041 0105