Specifications

Table Of Contents
configure
151Fabric OS Version 3.1.x/4.1.x Reference Guide
The configure command is navigated using a series of menus. Top level
menus and associated submenus consist of a text prompt, a list of acceptable
values, and a default value (in brackets).
Use the following options to control input:
Fabric Parameters
There are a number of settings which control the overall behavior and operation of
the Fabric. Some of these values, such as the domain, are assigned automatically
by the Fabric and may differ from one switch to another in the fabric. Other
parameters, such as the BB credit, can be changed for specific applications or
operating environments, but must be in agreement among all switches to allow
formation of the fabric.
The Fabric parameters are as follows:
Return When entered at a prompt with no preceding input, accepts
the default value (if applicable) and moves to the next
prompt.
Interrupt (Ctrl-C) Aborts the command immediately and ignores all changes
made. This keystroke is common on many computers, but
can be different on your system.
End-of-file (Ctrl-D) When entered at a prompt with no preceding input,
terminates the command and saves changes made. This
keystroke is common on many computers, but may be
different on your system.
Table 2: Configure Command Fabric Parameters
Field Default Range
Domain 1 1..239
BB Credit 16 V3.1.x = 1 to 27
V4.1.x = 1 to 16
R_A_TOV 10000 4000..120000
E_D_TOV 2000 1000 to 5000
Data Field Size 2112 256 to 2112
Sequence Level Switching 00 or 1
Disable Device Probing 00 or 1
Suppress Class F Traffic 00 or 1
Sync IO Mode (V3.1.x only)
00 or 1