Specifications

Fabric OS Commands
150 Fabric OS Version 3.1.x/4.1.x Reference Guide
Modify system configuration settings.
Synopsis
configure
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to change the following system configuration settings:
■ Fabric parameters
■ Virtual channel settings
■ Zoning operation parameters
■ RSCN transmission mode
■ NS pre-zoning mode
■ Arbitrated Loop parameters
■ System services
■ Portlog events enable
Note: For V3.1.x, do not run this command on an operational switch. First disable the
switch using the switchDisable command.
For V4.1.x, this command can now be executed on an enabled switch. If executed on
an enabled switch only a subset of the full parameter set is available. To access all
parameters controlled by this command, you must disable the switch.
configure