Specifications

Fabric OS Commands
108 Fabric OS Version 3.1.x/4.1.x Reference Guide
Note: This command requires an Advanced Zoning license.
When security is enabled, this command can only be issued from the Primary FCS
switch. See “Security Commands” on page 941.
Operands
This command has the following operand:
Example
To enable the zone configuration “Test_cfg”:
See Also
cfgAdd
cfgClear
cfgCreate
cfgDelete
cfgDisable
cfgRemove
cfgSave
cfgShow
cfgTransAbort
cfgtransshow
cfgName
Specify the name of a zone configuration to enable in
quotation marks. This operand is required.
switch:admin> cfgEnable “Test_cfg”
zone config “Test_cfg” is in effect