Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a

34 ServerIron ADX Advanced Server Load Balancing Guide

53-1002435-03

Sample deployment topologies

In Flow 1b, the ServerIron ADX changes the destination address in Flow 1a to that of the cache

server. CAM programming is the same as for basic TCS, as detailed in Table 1.

NOTE

FTP is not supported for TCS with destination NAT.

TCS with source NAT

To make sure that the reverse traffic from the cache server hits the ServerIron ADX, source NAT may be

used as shown in the following diagram:

Client

CIP

1a(CIP-RIP)

4b(RIP-CIP)

4a(TIP-CIP)

1bDestNAT(CIP-TIP)

3a(RIP-TIP)

3b(RIP-TIP)

2b(TIP-RIP)

2a(TIP-RIP)

CIP-Client IP Address

RIP-Real Server IP Address

VIP-Virtual IP Address

TIP-Cache Server IP Address

ServerIron

VIP

Real Server

RIP

Transparent

Cache Server

TIP