Manualshelf

Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a
129130131132133134135136137138
ServerIron ADX Advanced Server Load Balancing Guide 125
53-1002435-03
High availability designs with TCS
2
ServerIronADX(config)# vlan 24 by port
ServerIronADX(config-vlan-1)# untagged ethe 24
ServerIronADX(config-vlan-1)# router-interface ve 4
ServerIronADX(config-vlan-1)# exit
ServerIronADX(config)# ip route 195.90.5.0 255.255.255.0 195.92.10.7
ServerIronADX(config)# interface ve 1
ServerIronADX(config-ve-1)# ip address 195.92.10.1 255.255.255.0
ServerIronADX(config-ve-1)# exit
ServerIronADX(config)# interface ve 2
ServerIronADX(config-ve-2)# ip address 195.92.20.1 255.255.255.0
ServerIronADX(config-ve-2)# exit
ServerIronADX(config)# interface ve 3
ServerIronADX(config-ve-3)# ip address 172.32.1.1 255.255.255.0
ServerIronADX(config-ve-3)# exit
Configuring ServerIron ADX A
The following commands configure ServerIron ADX A in Figure 27.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.
ServerIronADX(config)# vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)# no spanning-tree
ServerIronADX(config-vlan-1)# exit
ServerIronADX(config)# vlan 13 by port
ServerIronADX(config-vlan-13)# untagged ethe 1/13
ServerIronADX(config-vlan-13)# no spanning-tree
ServerIronADX(config-vlan-13)# exit
ServerIronADX(config)# ip address 195.92.10.5 255.255.255.0
ServerIronADX(config)# ip default-gateway 195.92.10.1
ServerIronADX(config)# ip policy 1 cache tcp 0 global
ServerIronADX(config)# ip policy 2 cache udp 0 global
ServerIronADX(config)# ip policy 3 cache tcp http global
ServerIronADX(config)# ip policy 4 cache tcp rtsp global
ServerIronADX(config)# ip policy 5 cache tcp mms global
ServerIronADX(config)# ip policy 6 cache tcp ftp global
ServerIronADX(config)# server backup ethe 1/13 00e0.52c2.8b00
ServerIronADX(config)# server tcp-age 20
ServerIronADX(config)# server udp-age 20
ServerIronADX(config)# no server l4-check
ServerIronADX(config)# server cache-name cache1 195.92.10.22
ServerIronADX(config-rs-cache1)# port http
ServerIronADX(config-rs-cache1)# port http url "HEAD /"
ServerIronADX(config-rs-cache1)# port mms
ServerIronADX(config-rs-cache1)# port rtsp
ServerIronADX(config-rs-cache1)# port ftp
ServerIronADX(config-rs-cache1)# exit
ServerIronADX(config)# server cache-group 1
ServerIronADX(config-tc-1)# cache-name cache1
ServerIronADX(config-tc-1)# exit
Configuring ServerIron ADX B
The following commands configure ServerIron ADX B in Figure 27.