Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a

111

112

113

114

115

116

117

118

119

120

110 ServerIron ADX Advanced Server Load Balancing Guide

53-1002435-03

High availability designs with TCS

ServerIronADX(config)# interface ve 2

ServerIronADX(config-ve-2)# ip address 10.10.10.1 255.255.255.0

ServerIronADX(config-ve-2)# ip vrrp-extended vrid 2

ServerIronADX(config-ve-2-vrid-2)# backup

ServerIronADX(config-ve-2-vrid-2)# ip-address 10.10.10.10

ServerIronADX(config-ve-2-vrid-2)# track-port ve 1

ServerIronADX(config-ve-2-vrid-2)# track-port ve 3

ServerIronADX(config-ve-2-vrid-2)# enable

ServerIronADX(config)# interface ve 3

ServerIronADX(config-ve-3)# ip address 3.3.3.1 255.255.255.0

ServerIronADX(config-ve-3)# ip vrrp-extended vrid 3

ServerIronADX(config-ve-3-vrid-3)# backup

ServerIronADX(config-ve-3-vrid-3)# ip-address 3.3.3.10

ServerIronADX(config-ve-3-vrid-3)# track-port ve 1

ServerIronADX(config-ve-3-vrid-3)# track-port ve 2

ServerIronADX(config-ve-3-vrid-3)# enable

ServerIronADX(config)# server cache-name cache3 3.3.3.22

ServerIronADX(config-rs-cache2)# port mms

ServerIronADX(config-rs-cache2)# port rtsp

ServerIronADX(config-rs-cache2)# port pnm

ServerIronADX(config-rs-cache2)# port http

ServerIronADX(config-rs-cache2)# port http url "HEAD /"

ServerIronADX(config)# server cache-group 1

ServerIronADX(config-tc-1)# prefer-router-cnt 0

ServerIronADX(config-tc-1)# cache-name cache2

ServerIronADX(config-tc-1)# no http-cache-control

ServerIronADX(config-tc-1)# exit

ServerIronADX(config)# ip l4-policy 1 cache tcp 0 global

ServerIronADX(config)# ip l4-policy 2 cache udp 0 global

ServerIronADX(config)# ip l4-policy 3 cache tcp mms global

ServerIronADX(config)# ip l4-policy 4 cache tcp rtsp global

ServerIronADX(config)# ip l4-policy 5 cache tcp pnm global

ServerIronADX(config)# ip l4-policy 6 cache tcp http global

ServerIronADX(config)# ip route 195.92.20.0 255.255.255.0 10.10.20.2

ServerIronADX(config)# ip route 195.92.10.0 255.255.255.0 10.10.10.2

ServerIronADX(config)# router vrrp-extended

ServerIronADX(config)# server active-active-port ethe 1/16 vlan-id 16

ServerIronADX(config)# server force-delete

ServerIronADX(config)# no server l4-check

Commands for ServerIron ADX B

The following commands configure ServerIron ADX B in Figure 27.

NOTE

This example shows commands that are valid on the ServerIron ADX device only when it is running

the Layer 3 router image.

ServerIronADX(config)# vlan 1 name DEFAULT-VLAN by port

ServerIronADX(config-vlan-1)# exit

ServerIronADX(config)# vlan 100 by port

ServerIronADX(config-vlan-100)# untagged ethe 1/1 to 1/4

ServerIronADX(config-vlan-100)# router-interface ve 1

ServerIronADX(config-vlan-100)# exit

ServerIronADX(config)# vlan 200 by port

ServerIronADX(config-vlan-200)# untagged ethe 1/5 to 1/7

ServerIronADX(config-vlan-200)# router-interface ve 2

ServerIronADX(config-vlan-200)# exit