Technical data

Brocade ServerIron ADX Advanced Server Load Balancing Guide 139
53-1003441-01
Displaying related pass-through flow management information
3
flow-mgmt stick-to-sender
ip address 192.168.3.20 255.255.255.0
interface ve 4
ip address 192.168.4.20 255.255.255.0
Displaying related pass-through flow management information
To display related pass-through flow management information, refer to the following sections:
• “Displaying traffic statistics per MAC address”
• “Displaying the internal MAC table”
• “Displaying session information”
Displaying traffic statistics per MAC address
Use the show flow-mgmt stats command to display the statistics per MAC address.
Syntax: show flow-mgmt stats [mac-address]
The optional mac-address variable is the MAC address that you want to display. If you do not
specify a MAC address, this command displays the traffic statistics for all MAC addresses.
You can clear these statistics by using the clear flow-mgmt stats command.
ServerIronADX# clear flow-mgmt stats
Syntax: clear flow-mgmt stats
Displaying the internal MAC table
Pass-through flow management uses an internal MAC table to store the statistics per MAC address.
Use the show flow-mgmt mac-table command to debug if a specific MAC address is in the table.
Syntax: show flow-mgmt mac-table
ServerIronADX# show flow-mgmt stats
Flow-mgmt stick-to-sender traffic:
MAC VLAN CurConn TotConn Rx-pkts Tx-pkts Rx-octet Tx-octet
--- ---- ------- ------- ------- ------- -------- --------
000c.290e.ad66 1 0 0 0 0 0 0
000c.2906.4469 1 0 0 0 0 0 0
000c.298c.cdf2 1 0 0 0 0 0 0
ServerIronADX# show flow-mgmt mac-table
Index 102 Vlan 4 MAC 000c.290e.ad66
Index 105 Vlan 4 MAC 000c.2906.4469
Index 242 Vlan 4 MAC 000c.298c.cdf2
Total entries: 3