Manualshelf

Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a
141142143144145146147148149150
134 Brocade ServerIron ADX Advanced Server Load Balancing Guide
53-1003441-01
High availability designs with TCS
2
ServerIronADX(config)#interface ve 1
ServerIronADX(config-ve-1)#ip address 192.92.10.1 255.255.255.0
ServerIronADX(config-ve-1)#exit
ServerIronADX(config)#interface ve 2
ServerIronADX(config-ve-2)#ip address 192.92.20.1 255.255.255.0
ServerIronADX(config-ve-2)#exit
ServerIronADX(config)#interface ve 3
ServerIronADX(config-ve-3)#ip address 172.32.1.1 255.255.255.0
ServerIronADX(config-ve-3)#exit
Configuring ServerIron ADX A
The following commands configure ServerIron ADX A in Figure 29.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.
ServerIronADX(config)#vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)#no spanning-tree
ServerIronADX(config-vlan-1)#exit
ServerIronADX(config)#vlan 13 by port
ServerIronADX(config-vlan-13)#untagged ethe 1/13
ServerIronADX(config-vlan-13)#no spanning-tree
ServerIronADX(config-vlan-13)#exit
ServerIronADX(config)#ip address 192.92.10.5 255.255.255.0
ServerIronADX(config)#ip default-gateway 192.92.10.1
ServerIronADX(config)#ip policy 1 cache tcp 0 global
ServerIronADX(config)#ip policy 2 cache udp 0 global
ServerIronADX(config)#ip policy 3 cache tcp http global
ServerIronADX(config)#ip policy 4 cache tcp rtsp global
ServerIronADX(config)#ip policy 5 cache tcp mms global
ServerIronADX(config)#ip policy 6 cache tcp ftp global
ServerIronADX(config)#server backup ethe 1/13 00e0.52c2.8b00
ServerIronADX(config)#server tcp-age 20
ServerIronADX(config)#server udp-age 20
ServerIronADX(config)#no server l4-check
ServerIronADX(config)#server cache-name cache1 192.92.10.22
ServerIronADX(config-rs-cache1)#port http
ServerIronADX(config-rs-cache1)#port http url "HEAD /"
ServerIronADX(config-rs-cache1)#port mms
ServerIronADX(config-rs-cache1)#port rtsp
ServerIronADX(config-rs-cache1)#port ftp
ServerIronADX(config-rs-cache1)#exit
ServerIronADX(config)#server cache-group 1
ServerIronADX(config-tc-1)#cache-name cache1
ServerIronADX(config-tc-1)#exit
Configuring ServerIron ADX B
The following commands configure ServerIron ADX B in Figure 29.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.
ServerIronADX(config)#vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)#no spanning-tree
ServerIronADX(config-vlan-1)#exit
ServerIronADX(config)#vlan 13 by port