Manualshelf

Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a
131132133134135136137138139140
130 Brocade ServerIron ADX Advanced Server Load Balancing Guide
53-1003441-01
High availability designs with TCS
2
ServerIronADX(config)#vlan 999 by port
ServerIronADX(config-vlan-999)#untagged ethe 3/24
ServerIronADX(config-vlan-999)#exit
ServerIronADX(config)#interface ve 1
ServerIronADX(config-ve-1)#ip address 10.1.1.251 255.255.255.0
ServerIronADX(config-ve-1)#ip vrrp-extended vrid 5
ServerIronADX(config-ve-1-vrid-5)#backup
ServerIronADX(config-ve-1-vrid-5)#ip-address 10.1.1.254
ServerIronADX(config-ve-1-vrid-5)#track-port e 3/1
ServerIronADX(config-ve-1-vrid-5)#track-port e 3/2
ServerIronADX(config-ve-1-vrid-5)#track-port e 3/3
ServerIronADX(config-ve-1-vrid-5)#enable
ServerIronADX(config-ve-1)#ip vrrp-extended vrid 6
ServerIronADX(config-ve-1-vrid-6)#backup
ServerIronADX(config-ve-1-vrid-6)#ip-address 10.1.1.253
ServerIronADX(config-ve-1-vrid-6)#track-port e 3/1
ServerIronADX(config-ve-1-vrid-6)#track-port e 3/2
ServerIronADX(config-ve-1-vrid-6)#track-port e 3/3
ServerIronADX(config-ve-1-vrid-6)#enable
ServerIronADX(config-ve-1-vrid-6)#exit
ServerIronADX(config)#interface ve 2
ServerIronADX(config-ve-2)#ip address 10.2.24.251 255.255.255.0
ServerIronADX(config-ve-2)#ip ospf area 0
ServerIronADX(config-ve-2)#exit
ServerIronADX(config)#ip l4-policy 1 cache tcp 0 global
ServerIronADX(config)#ip l4-policy 2 cache udp 0 global
ServerIronADX(config)#ip l4-policy 3 cache tcp http global
ServerIronADX(config)#ip l4-policy 4 cache tcp ftp global
ServerIronADX(config)#ip l4-policy 5 cache tcp mms global
ServerIronADX(config)#ip router-id 10.2.24.251
ServerIronADX(config)#router vrrp-extended
ServerIronADX(config)#server active-active-port ethe 3/13 vlan-id 13
ServerIronADX(config)#router ospf
ServerIronADX(config-ospf-router)#area 0
ServerIronADX(config-ospf-router)#redistribution connected
ServerIronADX(config-ospf-router)#exit
The following commands enable session synchronization on the ports where the active-active SLB
feature is used. This is required both to ensure continued service following a failover and to enable
each ServerIron ADX to send server replies back to the clients, regardless of which ServerIron ADX
load balanced the request.
ServerIronADX(config)#server port 80
ServerIronADX(config-port-80)#session-sync
ServerIronADX(config-port-80)#tcp
ServerIronADX(config-port-80)#exit
ServerIronADX(config)#server port 21
ServerIronADX(config-port-21)#session-sync
ServerIronADX(config-port-21)#exit
ServerIronADX(config)#server port 1755
ServerIronADX(config-port-1755)#session-sync
ServerIronADX(config-port-1755)#tcp
ServerIronADX(config-port-1755)#udp
ServerIronADX(config-port-1755)#exit
ServerIronADX(config)#server port 53
ServerIronADX(config-port-53)#session-sync
ServerIronADX(config-port-53)#exit
ServerIronADX(config)#server port 443
ServerIronADX(config-port-443)#session-sync
ServerIronADX(config-port-443)#tcp