Technical data

Brocade ServerIron ADX Advanced Server Load Balancing Guide 129
53-1003441-01
High availability designs with TCS
2
NetIron(config-vlan-2)#untagged ethe 1 to 2
NetIron(config-vlan-2)#router-interface ve 2
NetIron(config-vlan-2)#exit
NetIron(config)#vlan 23 by port
NetIron(config-vlan-23)#untagged ethe 23
NetIron(config-vlan-23)#exit
NetIron(config)#interface ve 1
NetIron(config-ve-1)#ip address 10.172.1.4 255.255.255.0
NetIron(config-ve-1)#ip ospf area 0
NetIron(config-ve-1)#ip vrrp-extended vrid 3
NetIron(config-ve-1-vrid-3)#backup
NetIron(config-ve-1-vrid-3)#ip-address 10.172.1.1
NetIron(config-ve-1-vrid-3)#track-port e 1
NetIron(config-ve-1-vrid-3)#track-port e 2
NetIron(config-ve-1-vrid-3)#track-port e 8
NetIron(config-ve-1-vrid-3)#enable
NetIron(config-ve-1)#ip vrrp-extended vrid 4
NetIron(config-ve-1-vrid-4)#backup
NetIron(config-ve-1-vrid-4)#ip-address 10.172.1.2
NetIron(config-ve-1-vrid-4)#track-port e 1
NetIron(config-ve-1-vrid-4)#track-port e 2
NetIron(config-ve-1-vrid-4)#track-port e 8
NetIron(config-ve-1-vrid-4)#enable
NetIron(config-ve-1)#exit
NetIron(config)#interface ve 2
NetIron(config-ve-2)#ip address 10.2.24.2 255.255.255.0
NetIron(config-ve-2)#ip ospf area 0
NetIron(config-ve-2)#exit
NetIron(config)#interface ethernet 23
NetIron(config-if-23)#ip address 10.173.1.1 255.255.255.0
NetIron(config-if-23)#exit
NetIron(config)#ip route 0.0.0.0 0.0.0.0 10.2.24.251
NetIron(config)#ip router-id 10.2.24.2
NetIron(config)#router vrrp-extended
NetIron(config)#route-only
NetIron(config)#router ospf
NetIron(config-ospf-router)#area 0
NetIron(config-ospf-router)#redistribution connected
NetIron(config-ospf-router)#redistribution static
NetIron(config-ospf-router)#exit
Commands for ServerIron ADX 253
The following commands configure ServerIron ADX 253 in Figure 31.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.
ServerIronADX(config)#vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)#router-interface ve 1
ServerIronADX(config-vlan-1)#exit
ServerIronADX(config)#vlan 2 by port
ServerIronADX(config-vlan-2)#untagged ethe 3/1 ethe 3/3 ethe 4/1 ethe 4/3
ServerIronADX(config-vlan-2)#router-interface ve 2
ServerIronADX(config-vlan-2)#exit
ServerIronADX(config)#vlan 16 by port
ServerIronADX(config-vlan-16)#untagged ethe 3/16
ServerIronADX(config-vlan-16)#static-mac-address 00e0.52ee.c700 ethernet 3/16
ServerIronADX(config-vlan-16)#exit