Manualshelf

Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a
131132133134135136137138139140
122 Brocade ServerIron ADX Advanced Server Load Balancing Guide
53-1003441-01
High availability designs with TCS
2
ServerIronADX(config-tc-1)#cache-name cache1
ServerIronADX(config-tc-1)#no http-cache-control
ServerIronADX(config-tc-1)#exit
ServerIronADX(config)#ip l4-policy 1 cache tcp 0 global
ServerIronADX(config)#ip l4-policy 2 cache udp 0 global
ServerIronADX(config)#ip l4-policy 3 cache tcp mms global
ServerIronADX(config)#ip l4-policy 4 cache tcp rtsp global
ServerIronADX(config)#ip l4-policy 5 cache tcp pnm global
ServerIronADX(config)#ip l4-policy 6 cache tcp http global
ServerIronADX(config)#ip route 172.32.1.0 255.255.255.0 10.3.3.4
ServerIronADX(config)#router vrrp-extended
ServerIronADX(config)#server active-active-port ethe 1/16 vlan-id 16
ServerIronADX(config)#server force-delete
ServerIronADX(config)#no server l4-check
Commands for ServerIron ADX B
The following commands configure ServerIron ADX B in Figure 30.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.
ServerIronADX(config)#vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)#exit
ServerIronADX(config)#vlan 100 by port
ServerIronADX(config-vlan-100)#untagged ethe 1/1 to 1/4
ServerIronADX(config-vlan-100)#router-interface ve 1
ServerIronADX(config-vlan-100)#exit
ServerIronADX(config)#vlan 200 by port
ServerIronADX(config-vlan-200)#untagged ethe 1/5 to 1/7
ServerIronADX(config-vlan-200)#router-interface ve 2
ServerIronADX(config-vlan-200)#exit
ServerIronADX(config)#vlan 500 by port
ServerIronADX(config-vlan-500)#untagged ethe 1/8 to 1/12
ServerIronADX(config-vlan-500)#router-interface ve 3
ServerIronADX(config-vlan-500)#exit
ServerIronADX(config)#vlan 16 by port
ServerIronADX(config-vlan-16)#untagged ethe 1/16
ServerIronADX(config-vlan-16)#static-mac-address 00e0.52ee.d600 ethernet 1/16
ServerIronADX(config-vlan-16)#exit
ServerIronADX(config)#interface ve 1
ServerIronADX(config-ve-1)#ip address 10.10.20.3 255.255.255.0
ServerIronADX(config-ve-1)#ip vrrp-extended vrid 1
ServerIronADX(config-ve-1-vrid-1)#backup
ServerIronADX(config-ve-1-vrid-1)#ip-address 10.10.20.10
ServerIronADX(config-ve-1-vrid-1)#track-port ve 2
ServerIronADX(config-ve-1-vrid-1)#track-port ve 3
ServerIronADX(config-ve-1-vrid-1)#enable
ServerIronADX(config)#interface ve 2
ServerIronADX(config-ve-2)#ip address 10.10.10.3 255.255.255.0
ServerIronADX(config-ve-2)#ip vrrp-extended vrid 2
ServerIronADX(config-ve-2-vrid-2)#backup
ServerIronADX(config-ve-2-vrid-2)#ip-address 10.10.10.10
ServerIronADX(config-ve-2-vrid-2)#track-port ve 1
ServerIronADX(config-ve-2-vrid-2)#track-port ve 3
ServerIronADX(config-ve-2-vrid-2)#enable
ServerIronADX(config)#interface ve 3
ServerIronADX(config-ve-3)#ip address 10.3.3.3 255.255.255.0
ServerIronADX(config-ve-3)#ip vrrp-extended vrid 3