Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00a

131

132

133

134

135

136

137

138

139

140

Brocade ServerIron ADX Advanced Server Load Balancing Guide 121

53-1003441-01

High availability designs with TCS

Commands for ServerIron ADX A

The following commands configure ServerIron ADX A in Figure 30.

NOTE

This example shows commands that are valid on the ServerIron ADX device only when it is running

the Layer 3 router image.

ServerIronADX(config)#vlan 1 name DEFAULT-VLAN by port

ServerIronADX(config-vlan-1)#exit

ServerIronADX(config)#vlan 100 by port

ServerIronADX(config-vlan-100)#untagged ethe 1/1 to 1/4

ServerIronADX(config-vlan-100)#router-interface ve 1

ServerIronADX(config-vlan-100)#exit

ServerIronADX(config)#vlan 200 by port

ServerIronADX(config-vlan-200)#untagged ethe 1/5 to 1/7

ServerIronADX(config-vlan-200)#router-interface ve 2

ServerIronADX(config-vlan-200)#exit

ServerIronADX(config)#vlan 500 by port

ServerIronADX(config-vlan-500)#untagged ethe 1/8 to 1/12

ServerIronADX(config-vlan-500)#router-interface ve 3

ServerIronADX(config-vlan-500)#exit

ServerIronADX(config)#vlan 16 by port

ServerIronADX(config-vlan-16)#untagged ethe 1/16

ServerIronADX(config-vlan-16)#static-mac-address 00e0.52ee.6900 ethernet 1/16

ServerIronADX(config-vlan-16)#exit

ServerIronADX(config)#interface ve 1

ServerIronADX(config-ve-1)#ip address 10.10.20.1 255.255.255.0

ServerIronADX(config-ve-1)#ip vrrp-extended vrid 1

ServerIronADX(config-ve-1-vrid-1)#backup

ServerIronADX(config-ve-1-vrid-1)#ip-address 10.10.20.10

ServerIronADX(config-ve-1-vrid-1)#track-port ve 2

ServerIronADX(config-ve-1-vrid-1)#track-port ve 3

ServerIronADX(config-ve-1-vrid-1)#enable

ServerIronADX(config)#interface ve 2

ServerIronADX(config-ve-2)#ip address 10.10.10.1 255.255.255.0

ServerIronADX(config-ve-2)#ip vrrp-extended vrid 2

ServerIronADX(config-ve-2-vrid-2)#backup

ServerIronADX(config-ve-2-vrid-2)#ip-address 10.10.10.10

ServerIronADX(config-ve-2-vrid-2)#track-port ve 1

ServerIronADX(config-ve-2-vrid-2)#track-port ve 3

ServerIronADX(config-ve-2-vrid-2)#enable

ServerIronADX(config)#interface ve 3

ServerIronADX(config-ve-3)#ip address 10.3.3.1 255.255.255.0

ServerIronADX(config-ve-3)#ip vrrp-extended vrid 3

ServerIronADX(config-ve-3-vrid-3)#backup

ServerIronADX(config-ve-3-vrid-3)#ip-address 10.3.3.10

ServerIronADX(config-ve-3-vrid-3)#track-port ve 1

ServerIronADX(config-ve-3-vrid-3)#track-port ve 2

ServerIronADX(config-ve-3-vrid-3)#enable

ServerIronADX(config)#server cache-name cache1 172.32.1.20

ServerIronADX(config-rs-cache1)#remote-cache

ServerIronADX(config-rs-cache1)#port mms

ServerIronADX(config-rs-cache1)#port rtsp

ServerIronADX(config-rs-cache1)#port pnm

ServerIronADX(config-rs-cache1)#port http

ServerIronADX(config-rs-cache1)#port http url "HEAD /"

ServerIronADX(config)#server cache-group 1

ServerIronADX(config-tc-1)#prefer-router-cnt 0

ServerIronADX(config-tc-1)#dest-nat