Technical data

Brocade ServerIron ADX Advanced Server Load Balancing Guide 117
53-1003441-01
High availability designs with TCS
2
ServerIronADX(config-rs-cache3)#port rtsp
ServerIronADX(config-rs-cache3)#port pnm
ServerIronADX(config-rs-cache3)#port http
ServerIronADX(config-rs-cache3)#port http url "HEAD /"
ServerIronADX(config)#server cache-group 1
ServerIronADX(config-tc-1)#prefer-router-cnt 0
ServerIronADX(config-tc-1)#cache-name cache3
ServerIronADX(config-tc-1)#exit
ServerIronADX(config)#ip l4-policy 1 cache tcp 0 global
ServerIronADX(config)#ip l4-policy 2 cache udp 0 global
ServerIronADX(config)#ip l4-policy 3 cache tcp mms global
ServerIronADX(config)#ip l4-policy 4 cache tcp rtsp global
ServerIronADX(config)#ip l4-policy 5 cache tcp pnm global
ServerIronADX(config)#ip l4-policy 6 cache tcp http global
ServerIronADX(config)#interface ethernet 1/22
ServerIronADX(config-if-1/22)#ip address 172.32.1.1 255.255.255.0
ServerIronADX(config-if-1/22)#exit
Layer 3 symmetric active-active HA TCS configuration
Figure 29 illustrates an symmetric active-active HA TCS configuration.
FIGURE 29 Symmetric active-active HA TCS configuration
Commands for ServerIron ADX A
The following commands configure ServerIron ADX A in Figure 29.
NOTE
This example shows commands that are valid on the ServerIron ADX device only when it is running
the Layer 3 router image.