Technical data

100 Brocade ServerIron ADX Advanced Server Load Balancing Guide
53-1003441-01
Displaying cache information
2
Displaying cache information
To display cache information, enter the following command at any level of the CLI.
Syntax: show cache-group
To clear the statistics displayed by the show cache-group command, use the following command.
ServerIronADX#clear server traffic
Syntax: clear server traffic
TABLE 11 Transaction allocation and load balancing performed by ServerIron ADX doing Layer-7 TCS based on
the load state of the cache server
Cache Server state New transactions Existing transactions
Underused Allows Allows
Normal Allows Allows
Burdened Allows Allows
Stressed Allows (If no other cache in SNMP state 1 to 3 exists. Otherwise, all
the transactions will go to caches whose state is in between 1 to 3.
Allows
Overloaded/overtax
ed
Does not allow Allows
Halting Does not allow Allows
Offline Does not allow Allows
Initializing Does not allow Allows
ServerIronADX#show cache-group
Cache-group 1 has 1 members Admin-status = Enabled Active = 0
Hash_info: Dest_mask = 255.255.255.0 Src_mask = 0.0.0.0
Cache Server Name Admin-status L4-Hash-Buckets L7-Hash-Buckets
cs1 6 0 0
Name: cs1 IP: 192.168.1.1 State: 6 Groups = 1
Spoof Enable Cache->Web-Server Web-Server->Cache
CurCon TotCon Packets Octets Packets Octets
Total 0 0 0 0 0 0
Client->Cache Cache->Client
State CurCon TotCon Packets Octets Packets Octets
http active 0 0 0 0 0 0
Total 0 0 0 0 0 0
Uncached traffic total
Connection Client->Web-Server Web-Server->Client
Packets Octets Packets Octets
0 0 0 0 Cd 0