System information

Dell
PowerEdge M1000e Technical Guide 52
Wake on LAN (WOL) is enabled after a power down and power up of the enclosure. FlexAddress on
Ethernet devices is programmed by the module server BIOS. In order for the blade BIOS to program
the address, it needs to be operational which requires the blade to be powered up. Once the power-
down and power-up sequence completes, the FlexAddress feature is available for Wake-On-LAN
(WOL) function.
For information on implementing FlexAddress on an M1000e, see the Using FlexAddress chapter in the
Dell Chassis Management Controller Firmware x.x User Guide on Support.Dell.com/Manuals.