System information

Dell
PowerEdge M1000e Technical Guide 37
Figure 24. I/O Cooling Air Profile
The I/O modules use a bypass duct to draw ambient air from the front of the system to the I/O
module inlet, as seen in the figure. This duct is located above the server modules. This cool air is
then drawn down through the I/O modules in a top to bottom flow path and into the plenum
between the midplane and fans, from where it is exhausted from the system.
Figure 25. Power Supply Inlet and Cooling Air Profile
The power supplies, located in the back of the system, use basic front‐to‐back cooling, but draw
their inlet air from a duct located beneath the server modules, as seen in the figure above. This
ensures that the power supplies receive ambient temperature air.