System information

Dell
PowerEdge M1000e Technical Guide 26
Figure 20. Power Architecture
These supplies are hot-swappable, so at any time you can move the power supply from one slot to
another as long as there is enough reserve capacity.
5.1.1 2360 Watt Power Supplies
The 2360W (230V) power supply offers current sharing between power supplies, allowing a total
system redundant power of approximately 6700W in a 3+3 power supply configuration.
The M1000e requires three power supplies to power a fully populated system or six power supplies in
a fully redundant system.
5.1.2 2700 Watt Power Supplies
The 2700W power supply provides two different capacity levels: 2700W and 1350W. The capacity is
determined by the AC cord line. If 220VAC is connected, the capacity is 2700W; if 110VAC is
connected, the capacity is 1350W. A 220VAC and 110VAC line cannot be plugged into the chassis at
the same time.