System information

Dell
PowerEdge M1000e Technical Guide 22
The LCD panel can be used as a diagnostic source and as a place to configure parameters of certain
chassis components as well as the server’s iDRAC network configuration.
Figure 17 shows some of the capabilities of the LCD control panel.
Figure 17. LCD Panel Capabilities
The primary function of the LCD panel is to provide real-time information on the health and status of
the modules in the enclosure. LCD panel features include:
• A deployment setup wizard that allows you to configure the CMC module’s network settings
during initial system set up
• Menus to configure the iDRAC in each blade
• Status information screens for each blade
• Status information screens for the modules installed in the back of the enclosure, including
the I/O modules, fans, CMC, iKVM, and power supplies
• A network summary screen listing the IP addresses of all components in the system
• Real time power consumption statistics, including high and low values and average power
consumption
• Ambient temperature values
• AC power information
• Critical failure alerts and warnings
See the Dell PowerEdge M1000e Configuration Guide and the Dell Chassis Management Controller
Firmware Version x.x Administrator Reference Guide or the Dell Chassis Management Controller
Firmware Version 3.1 User Guide for more details on the capabilities of the LCD panel.