System information

Dell
PowerEdge M1000e Technical Guide 13
Server modules can be freely located within each 2 x 2 half-height quadrant. The mechanical design
of the M1000e has support structures for half-height server modules above or below double-width
server modules, and for half-height server modules side-by-side with full-height server modules.
Figure 4. Example Server Module Configurations
Fresh air plenums are at the top and bottom of the chassis. The bottom fresh air plenum provides
non‐preheated air to the M1000e power supplies. The top fresh air plenum provides non‐preheated
air to the CMC, iKVM, and I/O modules.
4.4 Back View and Features
Figure 5. Back View
The back of the M1000e enclosure contains system management, cooling, power, and I/O
components. At the top of the enclosure are slots for two CMC cards and one integrated KVM switch.