Installation guide

78 Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Software images
6
Multi-Service IronWare
Image (Primary or
Secondary)
Indicates the Multi-Service IronWare image installed in the primary or secondary
location in the NetIron CES and NetIron CER 2000 Series device’s code flash. The
image must be ce<xxxxx>. The actual image name depends on the version of
software you have running on your device.
The output displays the following information about the image:
• Version – “5.0.00Txxy” indicates the image version number. The “Txxy” is used
by Brocade for record keeping. The “xx” indicates the hardware type, while the
“y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image change,
the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled the
image.
Monitor Image The image must be ceb<xxxxx>. The output displays the following information about
the image:
• Version – “5.0.00Txxy” indicates the image version number. The “Txxy” is used
by Brocade for record keeping. The “xx” indicates the hardware type, while the
“y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image change,
the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled the
image.
Startup Configuration The output displays the following information about the startup configuration:
• Size – Size, in bytes, of the startup configuration.
• Check sum – A unique ID for the file. If the contents of the file change, the
check sum changes also.
• Modification date and time – Date and time that the startup configuration was
last saved.
Boot Flash The model number and size of the device’s boot flash.
Boot Image The image must be ceb<xxxxx>. The output displays the following information about
the image:
• Version – “5.0.00Txxy” indicates the image version number. The “Txxy” is used
by Brocade for record keeping. The “xx” indicates the hardware type, while the
“y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image change,
the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled the
image.
TABLE 15 Code flash and boot flash information (Continued)
This field... Displays...