Installation guide
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide 61
53-1001834-01
Power supply replacement
5
1. Remove the wires from your DC power source.
2. Unscrew the two assembly screws to unlock the DC wiring assembly (Figure 35) and remove
the adapter.
3. Loosen the wire tightening screws to remove the wires (Figure 36) from the DC wiring
assembly.
FIGURE 35 DC power supply screws
4. Unscrew the chassis attachment screws to unlock the power supply itself (Figure 35).
1 Chassis attachment screws 2 Assembly screws
1
1
2