Installation guide

46 Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Device connection
3
To connect a NetIron CES and NetIron CER 2000 Series device to another network device, you
must do the following:
• Install the fiber-optic modules if required
• Cable the modules with either copper cable or fiber optic cable as required
For information on installing fiber-optic modules see “Installing a new fiber optic module” on
page 71.
For information on cabling a fiber-optic module, see “Cabling a fiber optic module” on page 72.
For information on cleaning a fiber-optic module, see “Fiber optic connector cleaning” on page 72.