Installation guide

Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide 35
53-1001834-01
Device installation
2
Installation steps
1. Mount the device in the rack as illustrated in Figure 30.
FIGURE 30 Installing the NetIron CES or NetIron CER 2000 Series device in a rack
I
2. Using a 2-hole grounding lug and a minimum #6 AWG grounding wire, ground the chassis to
either a common bonding network or an isolated bonding network.
3. Proceed to “System power” on page 36.