Installation guide

Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide 13

53-1001834-01

Hardware features

10 Gigabit Ethernet ports

A 10 Gigabit Ethernet module contains two physical ports, through which you can connect your

NetIron CES 2000 Series router to other network devices at a speed of 10 Gigabits.

Into a physical port, you must insert a fiber-optic transceiver provided by Brocade. The

XFP-compliant fiber-optic modules provide an optical transceiver or physical medium-dependent

(PMD) interface for single or multi-mode fiber that can be used with the LAN physical layer (PHY).

The following 10 Gigabit optics are available from Brocade.

E1MG-LX 1000Base-LX SFP optic, single-mode fiber, LC connector

E1MG-LHA 1000Base-LHA SFP optic, single-mode fiber, LC connector

E1MG-LHB 1000Base-LHB SFP optic, single-mode fiber, LC connector, 150km Maximum Reach

E1MG-BXD 1000Base-BXD SFP optic single-mode fiber, 1490nm, LC connector.

This optic can only be connected to an E1MG-BXU

E1MG-CWDM80-1470 CWDM SFP optic, 80km, 1470nm, LC connector

E1MG-CWDM80-1490 CWDM SFP optic, 80Km, 1490nm, LC connector

E1MG-CWDM80-1510 CWDM SFP optic, 80Km, 1510nm, LC connector

E1MG-CWDM80-1530 CWDM SFP optic, 80Km, 1530nm, LC connector

E1MG-CWDM80-1550 CWDM SFP optic, 80Km, 1550nm, LC connector

E1MG-CWDM80-1570 CWDM SFP optic, 80Km, 1570nm, LC connector

E1MG-CWDM80-1590 CWDM SFP optic, 80Km, 1590nm, LC connector

E1MG-CWDM80-1610 CWDM SFP optic, 80Km, 1610nm, LC connector

E1MG-100FX 100Base-FX SFP optic multi-mode fiber, LC connector

E1MG-100BXU 100Base-BXU SFP optic single-mode fiber, 1310nm, LC connector.

This optic can only be connected to an E1MG-100BXD.

E1MG-100BXD 100Base-BXD SFP optic single-mode fiber, 1490nm, LC connector.

This optic can only be connected to an E1MG-100BXU.

E1MG-100FX-IR 100BaseFX-IR optic for SMF with LC connector. For distances up to 15nm.

E1MG-100FX-LR 100BaseFX-LR SFP optic for SMF with LC connector. For distances up to 40km.

TABLE 5 XFP-compliant optics for the 10 GbE Ethernet interface module

Part number Description

10G-XFP-SR 850nm serial pluggable XFP optic, target range 300m over multi-mode fiber

10G-XFP-LR 1310nm serial pluggable XFP optic for up to 10km over single-mode fiber

10G-XFP-ER 1550nm serial pluggable XFP optic for up to 40km over single-mode fiber

10G-XFP-ZR 1550nm serial pluggable XFP optic for up to 80km over single-mode fiber

10G-XFP-ZRD 10GBase-ZR DWDM, XFP optic, 80km, 1530.33 to 1561.42

10G-XFP-CX4 10-Base-CX4, XFP transceiver, 15km, CX connector

TABLE 4 SFP-compliant transceivers for the 100/1000 Ethernet interface module (Continued)

Part number Description