Installation guide

Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide 105
53-1001834-01
Appendix
C
Hardware Specifications
Hardware specifications
This section contains the following hardware specifications for the NetIron CES 2000 and NetIron
CER 2000 Series devices:
“Power specifications”
“Physical dimensions”
“Operating environment”
“Storage environment”
“Safety agency approvals”
Power supply frequency requirements
The power supply frequency requirements for the NetIron CES 2000 and NetIron CER 2000 Series
are as follows:
AC Input Rating: 100 -240V, 50/60 Hz, 6.0 A Max Per Power Supply
AC Operating Voltage Range: 85 - 264V, 50/60 Hz
DC Input Rating: -48V, 15.0 A Max Per Power Supply
DC Operating Range: -40 to -60 V
Power specifications
This section contains the power specifications for the NetIron CES 2000 and NetIron CER 2000
Series devices.
Table 19 provides the minimum and maximum voltage and current ratings.
Table 20 provides the maximum power calculations.
TABLE 19 NetIron CES 2000 and NetIron CER 2000 Series operating voltage and current
Power supply Voltage Current
AC 100-240 VAC 6 A
DC 48 VDC 15 A
TABLE 20 Maximum power calculations at 100-240 VAC
NetIron CES 2000 and NetIron CER 2000 Series
chassis
Amps Watts BTUs per hour
NetIron CES 2024C 1.45 120 410
NetIron CES 2024C with 2x10G uplink installed 2.30 170 580