Installation guide

Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide 91
53-1001834-01
PREMIUM package upgrade
6
CAUTION
Do not push too hard. If the DIP key does not readily go into the DIP socket, stop pushing and
verify that the lead pins are straightened and properly aligned over the holes, straighten any lead
pins that need straightening, then try again.
5. Insert the DIP key provided in this upgrade kit into the DIP socket on the motherboard.
FIGURE 43 DIP key insertion for NetIron CES 2024
4
1EEPROM
2socket
3pin 1
1
2
3