Installation guide

Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide 89
53-1001834-01
PREMIUM package upgrade
6
Upgrade kit contents
Before beginning the upgrade, please verify the package contents. If any items are missing from
the kit, contact your place of purchase. The upgrade kit contains the following:
• Electrostatic Discharge (ESD) protection kit
• Upgrade instructions
• Dual Inline Package (DIP) key (also called a PROM) that has eight pins. You should have one of
the part numbers listed in Table 18.
CAUTION
Do not use an electric screwdriver when upgrading the device to a premium package.
You need a #1 Phillips-head screwdriver and an ESD wrist strap to perform this procedure. You also
need a static-free work area.
Hardware installation
You need a Phillips-head screwdriver and an ESD wrist strap to perform this procedure. You also
need a static-free work area.
Follow the steps below to perform the upgrade.
DANGER
Disconnect the power cord from all power sources to completely remove power from the device.
1. Remove the power cables from the device.
2. If the device is mounted in an equipment rack, remove the device from the rack and place the
device in a static-free work area.
3. Put on the supplied ESD wrist strap and attach the clip end to a metal surface (such as an
equipment rack) to act as ground.
4. Remove the top cover from the device.
TABLE 18 NetIron CES and NetIron CER 2000 Series upgrade part numbers
Upgrade Prom Description
NI-CES2024-MEU Metro Edge Premium upgrade for NetIron CES 2000 Series 24-port models
NI-CES2024-L3U L3 Premium upgrade for NetIron CES 2000 Series 24-port models
NI-CES2048-MEU Metro Edge Premium upgrade for NetIron CES 2000 Series 48-port models
NI-CES2048-L3U L3 Premium upgrade for NetIron CES 2000 Series 48-port models
NI-CER-2024-ADVU Advanced Services Premium License for NetIron CER 24-port models.
NI-CER-2048-ADVU Advanced Services Premium License for NetIron CER 48-port models.