Hardware manual

Version 1.1, 03/31/2015
GSS CCT Evaluation Technical Report Page 36 of 56 © 2015 Gossamer Security Solutions, Inc.
Document: AAR-BrocadeNetIron5.8 All rights reserved.
Attacks”, and “Configuring Multi-Device Port Authentication” that collectively provide
instructions for configuring information flow rules.
o Warning banner
 The Security Configuration Guide includes instructions for “Setting a message of the day
banner” which provides instructions for a Banner image.
The evaluator observed the banner during testing for each of the console, SSH session, and Web interface.
Testing Assurance Activities: None Defined
2.5.2 SPECIFICATION OF MANAGEMENT FUNCTIONS (FMT_SMF.1)
2.5.2.1 FMT_SMF.1.1
TSS Assurance Activities: None Defined
Guidance Assurance Activities: None Defined
Testing Assurance Activities: None Defined
Component Assurance Activities: The security management functions for FMT_SMF.1 are distributed throughout
the PP and are included as part of the requirements in FMT_MTD, FPT_TST_EXT, and any cryptographic
management functions specified in the reference standards. Compliance to these requirements satisfies
compliance with FMT_SMF.1.
The evaluator was able to use the guidance documentation to configure the TOE to perform the other tests
required by the NDPP. All administrator commands are recorded in the audit trail.
2.5.3 RESTRICTIONS ON SECURITY ROLES (FMT_SMR.2)