Technical data

Brocade Mobility 7131 Access Point Product Reference Guide 463

53-1002517-01

3. Create a mesh supported WLAN with the Enable Client Bridge Backhaul option selected.

NOTE

This WLAN should not be mapped to any radio. Therefore, leave both of the “Available On” radio

options unselected.

4. Select the Client Bridge checkbox to enable client bridge functionality on the 802.11a/n radio.

Use the Mesh Network Name drop-down menu to select the name of the WLAN created in step

NOTE

You don't need to configure channel settings on the client bridge (AP#3). It automatically finds the

base bridges (AP#1 and AP#2) and uses the channel assigned to them.