Technical data

Brocade Mobility 7131 Access Point Product Reference Guide 371
53-1002517-01
8
br7131>admin(network.firewall)>advanced
Description:
Displays whether an Mobility 7131 Access Point firewall rule is intended for inbound traffic to an
interface or outbound traffic from that interface..
Syntax:
Example:
admin(network.firewall.adv-lan-access)>inbound
admin(network.firewall.adv-lan-access.inb)>list
-----------------------------------------------------------------------------
Idx SCR IP-Netmask Dst IP-Netmask TP SPorts DPorts Rev NAT Action
-----------------------------------------------------------------------------
1 1.2.3.4 2.2.2.2 all 1: 1: 0.0.0.0 deny
255.0.0.0 255.0.0.0 65535 65535 nat port 33
2 33.3.0.0 10.10.1.1 tcp 1: 1: 11.11.1.0 allow
255.255.255.0 255.255.255.0 65535 65535 nat port 0
For information on configuring the Firewall options available to the access point using the applet
(GUI), see Configuring Firewall Settings on page 6-210.
Network Router Commands
br7131>admin(network.router)>
Description:
Displays the router submenu. The items available under this command are:
show
Shows advanced subnet access parameters.
set
Sets advanced subnet access parameters.
import
Imports rules from subnet access.
inbound
Goes to the Inbound Firewall Rules submenu.
outbound
Goes to the Outbound Firewall Rules submenu.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to flash memory.
quit
Quits and exits the CLI session.
show
Displays the existing Mobility 7131 Access Point router configuration.
set
Sets the RIP parameters.
add
Adds user-defined routes.
delete
Deletes user-defined routes.