Technical data

Brocade Mobility 7131 Access Point Product Reference Guide 345
53-1002517-01
8
Syntax:
Example:
admin(network.wireless.radio.802-11n[2.4 GHz])>set placement indoor
admin(network.wireless.radio.802-11n[2.4 GHz])>set ch-mode user
admin(network.wireless.radio.802-11n[2.4 GHz])>set channel 11
admin(network.wireless.radio.802-11n[2.4 GHz])>set power 4
admin(network.wireless.radio.802-11n[2.4 GHz])>set antenna-type 1
admin(network.wireless.radio.802-11n[2.4 GHz])>set antenna-gain 10.00
admin(network.wireless.radio.802-11n[2.4 GHz])>set rf-mode b-only
admin(network.wireless.radio.802-11n[2.4 GHz])>set rates
admin(network.wireless.radio.802-11n[2.4 GHz])>set beacon 100
admin(network.wireless.radio.802-11n[2.4 GHz])>set dtim 1 40
admin(network.wireless.radio.802-11n[2.4 GHz])>set aggr ampdu enable
admin(network.wireless.radio.802-11n[2.4 GHz])>set shortgi disable
admin(network.wireless.radio.802-11n[2.4 GHz])>set single-antenna disable
admin(network.wireless.radio.802-11n[2.4 GHz])>set preamble disable
admin(network.wireless.radio.802-11n[2.4 GHz])>set rts 2341
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos cwmin 125
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos cwmax 255
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos aifsn 7
admin(network.wireless.radio.802-11n[2.4 GHz])>set qos txops 0
admin(network.wireless.radio.802-11n[2.4 GHz])>set qbss-beacon 110
admin(network.wireless.radio.802-11n[2.4 GHz])>set qbss-mode enable
admin(network.wireless.radio.802-11n[2.4 GHz])>set dynamic-chain-selection enable
set placement Defines the Mobility 7131 Access Point radio placement as indoors or outdoors.
ch-mode Determines how the radio channel is selected (user, auto-20 or auto-40).
channel Defines the radio channel used. Channel allowed depends on actual country of operation.
power Defines the antenna power transmit level. Depends on radio type, channel and country.
antenna-type Sets the numerical antenna type used with the access point (0-7). Antenna types include: 0-Default
antenna, 1-Dual band antenna, 2-Omni antenna, 3-Yagi antenna, 4-Embedded antenna, 5-Panel
antenna, 6-Patch antenna, 7-Sector antenna.
antenna-gain Sets the gain used by the selected antenna type (between 0.00 - 30.00 dBm)
rf-mode Sets the default rates for the 802.11 mode selected (b-only, g-only, n-only, b-and-g, or
bg-and-n).
rates Sets the supported radio transmit rates.
beacon Sets the beacon interval used by the radio.
dtim Defines the DTIM interval (by index) used by the radio.
aggr Sets the radio’s aggregation.
shortgi Enables/disables a short guard interval of 40MHz.
preamble Enables/disables short preamble support for the radio (this is 2.4 GHz radio specific).
rts Defines the RTS Threshold value for the radio.
range Sets the radio’s extended range (in miles 0-50).
qos Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.
qbss-beacon Sets the QBSS Channel Util Beacon Interval in kilo-usec (10 - 200).
qbss-mode Enables/disables the QBSS load element.
single-antenna Enables/disables single antenna support. Enable (default setting) to decrease sensitivity and device
retries.
dynamic-chain-sele
ction
Enables/disables dynamic chain selection for the radio. For more information, see Dynamic Chain
Selection on page 1-5.
tkip-ht-compatibility Enables/disables TKIP-HT rates compatibility.
bcmc-tx-speed Sets the transmission speed to either range or throughout mode.