Technical data

344 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
2 Supported 19.5 Mbps 40.5 Mbps
3 Supported 26.0 Mbps 54.0 Mbps
4 Supported 39.0 Mbps 81.0 Mbps
5 Supported 52.0 Mbps 108.0 Mbps
6 Supported 58.5 Mbps 121.5 Mbps
7 Supported 65.0 Mbps 135.0 Mbps
8 Supported 13.0 Mbps 27.0 Mbps
9 Supported 26.0 Mbps 54.0 Mbps
10 Supported 39.0 Mbps 81.0 Mbps
11 Supported 52.0 Mbps 108.0 Mbps
12 Supported 78.0 Mbps 162.0 Mbps
13 Supported 104.0 Mbps 216.0 Mbps
14 Supported 117.0 Mbps 243.0 Mbps
15 Supported 130.0 Mbps 270.0 Mbps
admin(network.wireless.radio.802-11n[2.4 GHz])>
admin(network.wireless.radio.802-11n[2.4 GHz])>
show aggr
Radio Aggregation Settings
Receive A-MSDU Buffer Limit :3839 bytes
Enable Transmit A-MPDU :enable
Transmit A-MPDU Size Limit :65536 bytes
Receive A-MPDU Size Limit :65536 bytes
Receive A-MPDU Minimum Spacing :0 usec
admin(network.wireless.radio.802-11n[2.4 GHz])>
admin(network.wireless.radio.802-11n[2.4 GHz])>
show qos
Radio QOS Parameter Set 11n-default
-----------------------------------------------------------------------------
Access Category CWMin CWMax AIFSN TXOPs (32 usec) TXOPs ms
-----------------------------------------------------------------------------
Background 15 1023 7 0 0.000
Best Effort 15 63 3 31 0.992
Video 7 15 1 94 3.008
Voice 37147 1.504
CAUTION
If you do NOT include the index number (for example, "set dtim 50"), the DTIMs for all four BSSIDs
will be changed to 50. To change individual DTIMs for BSSIDs, specify the BSS Index number (for
example, "set dtim 2 50). This will change the DTIM for BSSID 2 to 50.
For information on configuring the Radio 1 Configuration options available to the access point
using the applet (GUI), see Configuring a WLAN Access Control List (ACL) on page 5-144.
br7131>admin(network.wireless.radio.802-11n[2.4 GHz])>set
Description:
Defines specific 802.11n (2.4 GHz) radio parameters.