Technical data

322 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control :
Kerberos User Name : Default
Kerberos Password : ********
disallow MU to MU : disable
Use Secure Beacon : disable
answer Broadcast ess : disable
QoS Policy : Default
per-mu rate limiting : disabled
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
admin(network.wireless.wlan.create)>
show security
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual no encrypt Front Lobby
2 WEP Demo Manual WEP 64 2nd Floor
3 Open Manual no encrypt 1st Floor
WPA Countermeasure enable
admin(network.wireless.wlan.create)>
show acl
----------------------------------------------------------------------
ACL Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby
2 Admin 3rd Floor
3 Demo Room 5th Floor
admin(network.wireless.wlan.create)>
show qos
----------------------------------------------------------------------
QOS Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby
2 Voice Audio Dept
3 Video Video Dept
The CLI treats the following as invalid characters, thus they should not be used in the creation of an
ESSID (or other):
' " \ & $ ^ * + ? [ ( { | , < >
For information on creating a WLAN using the applet (GUI), see Creating/Editing Individual WLANs
on page 5-139.
br7131>admin(network.wireless.wlan)>edit
Description:
Edits the properties of an existing WLAN policy.