Technical data

318 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
Status : OK
For an overview of the Dynamic DNS options available using the applet (GUI), see Configuring
Dynamic DNS on page 5-135.
Network Wireless Commands
br7131>admin(network.wireless)
Description:
Displays the Mobility 7131 Access Point wireless submenu. The items available under this
command include:
br7131>admin(network.wireless)>set
Description:
Sets the access point’s wireless (proxy arp) configuration.
Syntax:
set Sets the access point’s wireless (proxy arp) configuration.
show Displays the access point’s wireless (proxy arp) configuration.
wlan Displays the WLAN submenu used to create and configure up to 16 WLANs per
Mobility 7131 Access Point.
security Displays the security submenu used to create encryption and authentication
based security policies for use with
Mobility 7131 Access Point WLANs.
acl Displays to the Access Control List (ACL) submenu to restrict or allow MU access
to Mobility 7131 Access Point WLANs.
radio Displays the radio configuration submenu used to specify how the 802.11a/n or
802.11b/g radio is used with
specific WLANs.
qos Displays the Quality of Service (QoS) submenu to prioritize specific kinds of data
traffic within a WLAN.
rate-limiting Displays the Rate Limiting submenu.
rogue-ap Displays the Rogue-AP submenu to configure devices located by the Mobility
7131 Access Point as friendly or threatening for interoperablity.
wips Goes to the Wireless Intrusion Protection System (WIPS) submenu.
mu-locationing Displays the MU locationing submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show <mode> enable/disable Enables/disables proxy-arp support.