Technical data

Brocade Mobility 7131 Access Point Product Reference Guide 305
53-1002517-01
8
Syntax:
Example:
admin(network.wan.nat)>set type 2 1-to-many
admin(network.wan.nat)>set ip 2 10.1.1.1 (this command is used when NAT is 1-to-1)
admin(network.wan.nat)>
show 2
WAN IP Mode : enable
WAN IP Address : 157.235.91.2
NAT Type : 1-to-many
Inbound Mappings : Port Forwarding
unspecified port forwarding mode : enable
unspecified port fwd. ip address : 111.223.222.1
one to many nat mapping
-----------------------------------------------------------------------------
--
LAN No. WAN IP
-----------------------------------------------------------------------------
--
1 157.235.91.2
2 10.1.1.1
For an overview of the NAT options available using the applet (GUI), see Configuring Network
Address Translation (NAT) Settings on page 5-132.
br7131>admin(network.wan.nat)>add
Description:
Adds NAT entries.
Syntax:
set type <index> <type> Sets the type of NAT translation for WAN address index <idx> (1-8) to
<type> (none, 1-to-1, or 1-to-many).
ip <index> <ip> Sets NAT IP mapping associated with WAN address <idx> to the
specified IP address <ip>.
inb <index> <ip>
<mode>
Sets inbound IP address for specified index <index> <ip address>
Sets inbound mode for specified index <index> <enable/disable>
outb <index> <ip>
<from> <to>
Sets outbound IP address for specified index <index> <ip address>
Sets outbound NAT destination <LAN1 or LAN2> <WAN ip 1-8 or None>.
add <idx> <name> <tran> <port1> <port2> <ip> <dst_port>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is the name of the
entry (1 to 7 characters), <tran> is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or all), <port1>
is the starting port number in a port range, <port2> is the ending port number in a port range, <ip> is the
internal IP address, and <dst_port> is the (optional) internal translation port.