Technical data

Brocade Mobility 7131 Access Point Product Reference Guide 283
53-1002517-01
8
? : display command help - Eg. ?, show ?, s?
* Restriction of “?”: : “?” after a function argument is treated
: as an argument
: Eg. admin<network.lan> set lan enable?
: (Here “?” is an invalid extra argument,
: because it is after the argument
: “enable”)
<ctrl-q> : go backwards in command history
<ctrl-p> : go forwards in command history
* Note : 1) commands can be incomplete
: - Eg. sh = sho = show
: 2) “//” introduces a comment and gets no
: resposne from CLI.
admin>
br7131>admin>passwd
Description:
Changes the password for the admin login.
Syntax:
Example:
admin>passwd
Old Admin Password:******
New Admin Password (0 - 11 characters):******
Verify Admin Password (0 - 11 characters):******
For information on configuring passwords using the applet (GUI), see Setting Passwords on page
6-190.
br7131>admin>summary
Description:
Displays the Mobility 7131 Access Point’s system summary.
passwd Changes the admin password for Mobility 7131 Access Point access. This requires typing the old
admin password and entering a new password and confirming it. Passwords can be up to 11
characters. The access point CLI treats the following as invalid characters:
' " \ & $ ^ * + ? [ ( { | , < >
In order to avoid problems when using the access point CLI, these characters should be avoided.