Technical data

Brocade Mobility 7131 Access Point Product Reference Guide 115
53-1002517-01
Chapter
5
Network Management
In this chapter
Refer to the following for network management configuration activities supported by the access
point user interface:
•Configuring the LAN Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
•Configuring WAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
•Enabling Wireless LANs (WLANs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
•Configuring Router Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
•Configuring IP Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Configuring the LAN Interface
The Mobility 7131 Access Point has one physical LAN port supporting two unique LAN interfaces.
The Mobility 7131 Access Point LAN port has its own MAC address. The LAN port MAC address is
always the value of the Mobility 7131 Access Point WAN port MAC address plus 1. The LAN and
WAN port MAC addresses can be located within the LAN and WAN Stats screens.
For information on locating the access point’s MAC addresses, see Viewing WAN Statistics on page
7-253 and Viewing LAN Statistics on page 7-256.
Use the LAN Configuration screen to enable one (or both) of the access point’s LAN interfaces,
assign them names, define which LAN is currently active on the access point Ethernet port and
assign a timeout value to disable the LAN connection if no data traffic is detected within a defined
interval.
To configure the Mobility 7131 Access Point LAN interface:
1. Select Network Configuration -> LAN from the Mobility 7131 Access Point menu tree.