Installation guide

Configuring the access point

26 Brocade Mobility 7131N-FGR Access Point Installation Guide

53-1001948-01

1. Start a browser and enter the following IP address in the address field:

https://10.1.1.1

NOTE

For optimum compatibility, use Sun Microsystems’ JRE 1.6 or higher (available from

Sun’s Website), and be sure to disable Microsoft’s Java Virtual Machine if installed.

NOTE

The computer being used should be configured to use the same IP address and

subnet mask as the access point.

The login screen displays.

1. Log in using admin as the default User ID and admin123 as the default

password. If the default login is successful, the Change Admin Password

screen displays.

2. Change the password to ensure theBrocade Mobility 7131N-FGR Access Point

is using a secure password different from the default password. The new

password must be at least 8 characters in length.

AP7131N_InstallationGuide.book Page 26 Tuesday, August 24, 2010 5:09 AM