Installation guide
Mounting the Mobility 7131
2
Brocade Mobility 7131 Installation Guide - Dependent Mode 7
53-1001567-04
The hardware and tools (customer provided) required to install the Mobility 7131 on
a wall consists of:
• Two Phillips pan head self-tapping screws
(ANSI Standard) #6-18 X 0.875in. Type A or AB Self-Tapping screw, or
(ANSI Standard Metric) M3.5 X 0.6 X 20mm Type D Self-Tapping screw
• Two wall anchors
• Wall mount template (included on the next page)
• Security cable (optional)