Installation guide

Mobility 7131 placement
2
Brocade Mobility 7131 Installation Guide - Dependent Mode 5
53-1001567-04
R1 defines the Mobility 7131’s radio 1 antenna connectors and R2 defines the
Mobility 7131’s radio 2 antenna connectors.
Certain Rogue AP Detection features use a radio to perform dual-band scanning.
The dedicated radio should be connected to an appropriate dual-band dipole
antenna (Part No. ML-2452-APA2-01).
The 2.4 GHz antenna suite includes the following models:
NOTE
An additional adapter is required to use ML-2499-11PNA2-01R and
ML-2499-BYGA2-01R model antennas. Please contact Brocade for more
information.
Part Number Antenna Type Nominal Net Gain (dBi)
ML-2499-11PNA2-01R Wide Angle Directional 8.5
ML-2499-HPA3-01R Omni-Directional Antenna 3.3
ML-2499-BYGA2-01R Yagi Antenna 13.9
ML-2452-APA2-01 Dual-Band 3.0
ML-2452-PTA2M3X3-2 Facade with 6 Element
Antenna Module
2.0
ML-2452-PTA3M3-036 3 Port MIMO Antenna 3.0