Installation guide

Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide 21
53-1002187-01
Installing a redundant power supply
2
DRAFT: BROCADE CONFIDENTIAL
1. Attach the brackets to the device using the screws provided in the rack mounting kit.
FIGURE 19 Attaching the brackets
2. Mount the device in the rack, using four rack-mounting screws (not provided).
FIGURE 20 Installing the RPS device in a rack
3. If installing multiple RPS devices, mount them in the rack, one below the other, in any order.
Lin
k
Ac
ti
vit
y
12
3
4
Fa
n Thermal Power