Network Router User Manual

Brocade ICX 6650 Layer 3 Routing Configuration Guide 273
53-1002603-01
Displaying OSPF V3 Information
Displaying IPv6 OSPF virtual link information
To display OSPF V3 virtual link information for the Brocade device, enter the show ipv6 ospf
virtual-link command at any level of the CLI.
Syntax: show ipv6 ospf virtual-link
This display shows the following information.
Displaying OSPF V3 virtual neighbor information
To display OSPF V3 virtual neighbor information for the Brocade device, enter the show ipv6 ospf
virtual-neighbor command at any level of the CLI.
Syntax: show ipv6 ospf virtual-neighbor
This display shows the following information.
TABLE 55 OSPF V3 virtual link information
Field Description
Index An index number associated with the virtual link.
Transit Area ID The ID of the shared area of two ABRs that serves as a connection point between the two
routers.
Router ID IPv4 address of the router at the other end of the virtual link (virtual neighbor).
Interface Address The local address used to communicate with the virtual neighbor.
State The state of the virtual link. Possible states include the following:
• P2P – The link is functioning as a point-to-point interface.
• DOWN – The link is down.
TABLE 56 OSPF V3 virtual neighbor information
Field Description
Index An index number associated with the virtual neighbor.
Router ID IPv4 address of the virtual neighbor.
Address The IPv6 address to be used for communication with the virtual neighbor.
Brocade#show ipv6 ospf virtual-link
Index Transit Area ID Router ID Interface Address State
1 1 10.1.1.1 2001:db8::2 P2P
Brocade#show ipv6 ospf virtual-neighbor
Index Router ID Address State Interface
1 10.1.1.1 2001:db8::1 Full ethe 1/1/3